Do you have a fascination with pyramids? Have you ever wondered what they are for? Well, you are not alone! People have long speculated that these tremendous structures were more than just places to enshrine your nobility after your death. If the pyramids produce invisible power, as some people claim, is it possible to harness that power? Read on and find out how you can build a pyramid of any size and give it a try to see if it will also generate your own pyramid power.

How do you test a pyramid? Putting objects inside and observing how these objects are influenced by the pyramid. At least that’s what people have done in the past. Razor blades become sharp and keep their edge much longer; fruit dries but does not rot or mold; plants grow faster and much fuller; milk turns into yogurt if left in long enough. These are all claims made by pyramid researchers.

what will you need

1. 4 pieces of cardboard that are large enough to create the size of pyramid you want.

2. Type.

3. A directional compass with a flat base.

exposing it

The Giza pyramid was built according to amazingly exact dimensions. For your experiments to work, you will need to duplicate these dimensions as physically as possible.

You are going to make 4 cardboard triangles and they must all be exactly the same size.

Lay one of the cardboard pieces face down and measure the length of the bottom side. Now, multiply that length by 0.951. The result will be the length of the other sides of the triangle.

For example, if the length of the bottom edge of the cardboard is 10 inches, the length of each of the other sides of the triangle would be 9.51 inches. Set up a drawing compass with a width of 9.51 inches and use it to make intersecting arcs over the base. The point where the arcs intersect will be the top of the triangle. Draw lines from this point down to each end of the base and one side of your pyramid is complete.

Create 3 more sides in the same way and cut out the triangles from the cardboard.

So you don’t get confused which is the bottom edge, mark the longest (bottom) edge before you cut it, to show that it belongs on the base.

Putting it all together

Lay a piece flat with the mark on the bottom. Place another piece next to it with its side touching the first, also with the mark on the bottom. Line these pieces up carefully so that each edge matches the other, and then tape them together.

Line up the two remaining pieces in the same way and glue them into place.

Now that you have all 4 sides connected, you can fold the pieces along each of the taped edges and bring your pyramid to life when the final edges are taped.

That’s it for the build, but you have to do one more thing to “activate” your pyramid.

Aligning your pyramid

Just as the Great Pyramid of Giza was aligned with amazing precision to face true north, you must do the same. It works like a radio antenna, so the more accurately you aim your pyramid, the higher its energy.

To do this, you need a compass with a straight base plate. You also need to know the declination angle for your particular area.

A compass points to magnetic north. This can vary by many degrees from true north, depending on your location. Its declination angle helps you convert magnetic north to true north and can be easily found by doing a web search for “find my declination angle”.

If your declination angle is a negative number, you must turn the compass clockwise that many degrees to find true north. If the angle is positive, turn the compass counterclockwise to compensate.

One more thing: when they give you your declination angle, they usually give you minutes as well as degrees. To convert these minutes to parts of degrees, divide the minutes by 60. For example: If your declination is 17 degrees, 26 minutes, divide 26 by 60 to get .43. This would make your total declination 17.43 degrees. You would then adjust your compass dial counterclockwise 17.43 degrees and this would point you directly to true north.

Place the adjusted compass on a flat surface, away from large objects and electrical appliances that may interfere with the magnetic field, and point it toward true north. Lay the pyramid on its side with one edge aligned parallel with the base plate. This is the direction the pyramid should be facing for maximum energy.

Testing the power of your pyramid

Each pyramid has a “sweet spot” and it is directly in the center one third of the way from the bottom to the top. In the Great Pyramid, this is where the king’s chamber was hidden. Keep this in mind when placing something inside. Also, if you are going to sharpen your razors, it helps to orient the razor edge in a north/south direction.

There is definitely something deep in the pyramids. Take the time to build one and have fun discovering what kind of pyramid power you can generate in your own home. Maybe you can be one of those who adds another piece to the puzzle of the mysteries of the pyramids.